How to Keep Your Car Looking New
- by siteadmin
Does your car have dull-looking paint and a dusty interior? Keeping your vehicle clean can make it look new and improve its resale value. It also protects your family’s health and keeps the air clean inside the car.
A video of a woman vigorously washing the inside of her car at a Perth car wash has gone viral on social media. Hopefully, it will inspire others to keep their cars clean.
Invest in a good hose
A good hose is vital for rinsing off the soap and water from the car after washing it. Look for a hose that is at least 25 feet long and has different spray settings. A nozzle that has small pores is also better, as this will be less likely to pick up stone chips and grit from the car. A bucket that can be used for mixing your cleaning solution is a must, as well as a sponge or wash mitt. Look for one that is made from rubber or plastic and has a grit guard to prevent dirt and sand from contaminating your car wash mitt or sponge.
Avoid washing your car near trees, as leaves, twigs, and buds can fall on the car and stick to it. This will make your job much more difficult in the future, as you will have to spend a lot of time trying to remove these contaminants.
Another piece of equipment that is very useful is an air compressor, which can be used to blow debris out of hard-to-reach places like vents and doors. A vacuum cleaner is also a must for cleaning the interior of your vehicle. Look for a model with strong suction and attachments that can reach difficult-to-reach areas, such as the boot and behind seats.
Wipe down the dashboard and console
If your car has a shiny dash or console, it needs to be cleaned on a regular basis to keep it looking new. Over time, dust will collect on the surfaces and cause a dull appearance. The best way to clean the dashboard is with a microfiber cloth or towel that is slightly dampened with a mild car cleaner solution. A quick wipe will remove any grit and grime. A clean dash can also help to protect the interior from sun damage.
Before using a car cleaning solution on your dash, start by vacuuming the entire area. This will lift up heavier particles of dirt and debris, making it easier to see where to clean. Also, it will prepare the surface for the application of a dashboard conditioner or cleaner.
Then, take a clean build-up-free cloth and gently wipe down the entire surface of the dashboard. Make sure to scour any dirt or stains you find and don’t forget to wipe the surrounding areas as well. Finally, rinse your cloth and repeat until the dashboard is completely clean.
Once your dashboard is clean, you can use a small amount of baby oil to add a natural sheen and help to prevent cracking and fading from UV rays. This can be found at most grocery stores and may require a little bit of experimentation to find the right amount for your particular car.
After this, apply a dash protector answer to your cleaned dashboard to help defend it from scratches and dings. This can also be purchased at most car parts stores and is usually fairly inexpensive.
Be aware that if your dash is made of plastic, vinyl, or rubber, it is important to avoid harsh chemicals like bleach or ammonia. These can break down the protective coating and cause the surface to crack. Instead, look for gentle cleaners that are specifically formulated to strengthen the plastic. You can also try a non-toxic spray or ozone generator to sanitize the surface of the dashboard. After this, a touch-up with a clean cloth should take care of any remaining dust.
Wash your car in sections
While cleaning your car can be a fun and satisfying activity, it’s important to do it in sections. Washing your whole car all at once can cause water spots, which are unsightly and difficult to remove. Instead, work on one section at a time and rinse the area you’ve just washed before moving on. This will help reduce the chances of scratching or scrubbing your car and will also allow you to get the most out of your soap.
Ideally, you should prepare two buckets of water – one with soap and one without. This will allow you to clean the car in sections and keep your soapy bucket free from contaminants that may damage the paint. You should also rinse your microfibre cloth or mitt as often as possible in the bucket with fresh water to prevent grit and dirt from damaging the paint when you rub it against your car.
Once you’ve washed each section, use the hose to rinse the area thoroughly. Then, use your high-quality drying towels to absorb the water droplets and help prevent them from leaving behind any marks or streaks. If you have a lot of water spots, consider applying a coat of wax to the paintwork to give your car a final shine and protection.
It’s best to avoid washing your car on a windy day, as the flying debris can damage the paintwork. Instead, wash your car in the morning or late evening, and don’t park it near a dusty road or under a tree where buds, bugs, and leaves can fall on the vehicle. Using a hose with a removable nozzle can be a helpful way to control the flow of water and ensure you don’t flood any areas that shouldn’t be wet.
After the last section is rinsed, make sure to wipe down the dashboard and console with a damp microfibre cloth. Make sure the cloth is well-rinsed to remove any remaining dirt that could scratch the paintwork, and then replace it. You can also use a dry microfibre towel to blow away any remaining dust and debris.
Use a microfibre cloth or mitt
If you’re looking for a better way to clean your car, consider investing in some microfibre clothes and mitts. These towels are made from a blend of polyester and polyamide fibers, which are very absorbent and durable. They can be used to remove dirt and grime from nearly any surface. The best part is that they’re easy to use and machine washable. You can find a variety of microfiber cleaning cloths, including one that fits over your hand and a mitt with a banded cuff to make it easier to reach hard-to-reach areas.
A microfiber cloth has millions of microscopic strands that are much finer than cotton fibers. In fact, each strand can have up to 100 times more surface area than human hair. The strands also come with a positive and negative charge, which attracts negatively-charged dust particles and draws them into the cloth. This can be a real-time saver when it comes to getting your car clean. In addition, microfiber is very absorbent, and a single square inch of the fabric can hold up to seven times its weight in water.
However, not all microfibre cloths are created equal. Bargain-priced ones typically have around 50,000 microfibers per square inch, while higher-end towels can contain up to 3.1 million of these tiny strands. Higher-end microfibers are also more durable and less likely to leave streaks. In order to maximize the life of your microfiber cloths, it is a good idea to pre-wash and inspect them before using them. This will help to ensure that they are free of contaminants like oils and cationic surfactants, which can cause the fibers to become coarse and stiff.
You should also avoid mixing contaminated towels into a washing load. It is recommended that you wash them separately from other items, and with a laundry soap that is specially formulated for microfibers. This will help to preserve their plush feel and keep them safe for delicate surfaces.
Finally, remember to always clean your microfibers in warm, soapy water before using them again. Be sure to rinse them thoroughly, and dry them on a clean table. A good quality microfiber towel should last for up to a year with proper care.
Does your car have dull-looking paint and a dusty interior? Keeping your vehicle clean can make it look new and improve its resale value. It also protects your family’s health and keeps the air clean inside the car. A video of a woman vigorously washing the inside of her car at a Perth car wash…